Metabones Canon EF Lens to Fuji G-mount T Smart Expander 1.26x (GFX)

• In some rare cases lens hoods designed for 3:2 may need to be removed for 4:3 use with Smart Expander.
• Each lens needs to go through a calibration procedure <click to view>  when first used. Refer to the online user manual on Metabones’ web site for instructions.
• Autofocus may have unsatisfactory performance and may not work at all with some lenses
• For video autofocus, increasing FOCUS SENSITIVITY and decreasing AF SPEED are required under the AF-C CUSTOM SETTING (MOVIE) menu.
• For video, aperture priority or manual exposure is recommended to avoid exposure flickering. EF lenses are not capable of fine-grained control of the aperture required by Fujifilm cameras.
• AF+MF and lens aberration correction are not supported.
• Some film-era lenses may not be able to achieve sufficient AF accuracy required for digital cameras. Worn lenses with faulty sensors may lead to AF problems on a mirrorless camera even though the lens may appear to function normally on a DSLR.
• Aperture diaphragm makes frequent noises with older lenses. Use aperture priority and manual exposure modes, or use a lens which supports smooth iris.
• With IS/OS/VC lenses the IS MODE setting is ignored and both SHOOTING ONLY and CONTINUOUS modes behave in the same way which is similar to a Canon camera but different from what Fujifilm OIS lenses do. This is done to maximize IS effectiveness. A negative consequence of this is that there may be no OIS during focus check.
• MF Distance Display does not work (although AF Distance Display does, if the lens transmits distance information). Since Metabones has a track record of releasing new firmware updates which significantly improve the features, performance, compatibility and reliability of existing products, these limitations are subject to change in the future. Please refer to the product pages on Metabones’ web site for the most up-to-date disclosure.

• EF-S lens. EF-S lenses require modification to fit or may remain incompatible even after modification.
• Lens correction such as peripheral shading, CA and distortion
• Focus confirmation “chip” (e.g. Dandelion)
• M42 screw mount adapters _{(see note 3)}
• Stacking non-Metabones/non-Conurus mount adapters on top (see note 4 and list of lenses which require modification below.)

• Fujifilm GFX 50S, GFX 50R and GFX 100

Note :

• 1. EF-S lenses do not fit on Smart Expander^TM. Some EF-S lenses may be modified to fit, but do so at your own risk.
• 2. Third-party lenses designed for APS-C format do not have enough coverage when used in conjunction with Smart Expander^TM.
• 3. Some improperly-made M42 screw mount adapters may short the electronic contacts of the Smart Expander^TM and cause damage to the Smart Expander^TM and/or camera body.
• 4. Many manual focus lenses (e.g. OM 28/2.8, OM 50/1.8, Leica R 15/3.5) have rear protrusions (spikes, levers, other appendages) which would damage the optics and/or housing of Smart Expander^TM. They need to be modified before they can be safely used on Smart Expander^TM Check and make sure there are no rear protrusions from the adapter/lens combination before using on Smart Expander^TM. Scratches and damages caused by rear protrusions on Smart Expander^TM are not covered by warranty.

Your PayPal receipt is your order confirmation. There is no separate email confirmation until the shipment takes place.

Disclaimer: we are NOT licensed, approved or endorsed by Canon and Fujifilm.