Tascam CA-XLR2d XLR Microphone Adapter For Mirrorless Cameras
16,900 ฿ – 18,900 ฿
In Stock
จุดเด่นผลิตภัณฑ์
- อแดปเตอร์ไมโครโฟน XLR ให้เป็นอินพุตของกล้อง
- สำหรับเสียงและพลังดิจิตอล
- HDDA Preamp + Analog/Digital Converter
- Provides 48V to Condenser Mics
- อินพุตไมโครโฟนสเตอริโอ 3.5 มม.
- เอาต์พุต 3.5 มม. สำหรับหูฟัง/กล้อง
- การบันทึกในกล้องช่วยให้มั่นใจได้ว่าภาพซิงค์
สเปค Tascam CA-XLR2d XLR Microphone Adapter For Mirrorless Cameras
| Sampling Frequency | 48k / 96k Hz |
| Quantization Bit Rate | 16 / 24 bit * Fs & Bitrate are synchronized with the settings of the connected camera |
| Number of channels | 2 channels |
| MIC inputs (Balanced) | |
| INPUT 1/2 Jacks | |
| Connectors | XLR-3-31 equivalent (1:GND, 2:HOT, 3:COLD) 6.3mm(1/4″) standard TRS jacks Input (Tip:HOT, Ring:COLD, Sleeve:GND) * Phantom power supported by XLR only |
| MIC IN | input switch set to “MIC” |
| Input Impedance | 2kΩ or higher |
| Maximum Input Level | +6dBu (ATT setting “46dB”) *1 |
| Minimum input level | -60dBu (ATT setting “0dB”) *1 |
| Gain range | 66dB |
| LINE IN | input switch set to “LINE” |
| Input Impedance | 10kΩ or higher |
| Maximum Input Level | +24dBu *1 |
| Rated input level | +4dBu *1 |
| Gain range | 66dB |
| MIC inputs (Unbalanced) | |
| INPUT 3 Jack | |
| Connector | 3.5mm(1/8″) Stereo mini jack * Support plug-in power |
| Input Impedance | 2kΩ or higher |
| Maximum Input Level | +6dBV (ATT setting “46dB”) *2 |
| Minimum input level | -60dBV (ATT setting “0dB”) *2 |
| Gain range | 66dB |
| Plug-in power | 2.7V |
| PHONE / CAMERA output (Unbalanced) | |
| OUTPUT Jack | |
| Connector | 3.5mm(1/8″) Stereo mini jack |
| Output level | 0.29Vrms (Fixed,OUTPUT setting “CAMERA”) 0.5Vrms (Output volume setting at maximum、OUTPUT “HEADPHONE”) |
| Headphone working impedance | 16 to 250Ω |
| Power | 2 AA batteries (alkaline, NiMH or lithium-ion) Supplied through accessory shoe of compatible camera |
| Power consumption | 2.0W (maximum) |
| Dimensions | 88.2(W) × 119.1(H) × 110.0(D)mm (not including protrusions) |
| Weight | |
| CA-XLR2d-C | 341g (mic holder attached, battery holder not attached) |
| CA-XLR2d-F | 331g (mic holder attached, battery holder not attached) |
| CA-XLR2d-AN | 357g (not including batteries, mic holder attached, battery holder attached) |
| Operating temperature | 0 to 40°C (32 to 104°F) |
| Included | |
| CA-XLR2d-C | Mic holder (attached to unit, Battery holder, 3.5mm(1/8″) stereo mini cable, TASCAM ID registration guide, Quick Guide (including warranty), CA-AK1-C accessory shoe mount adapter (attached to unit), CA-AK1-AN cold shoe mount adapter |
| CA-XLR2d-F | Mic holder (attached to unit, Battery holder, 3.5mm(1/8″) stereo mini cable, TASCAM ID registration guide, Quick Guide (including warranty), CA-AK1-F accessory shoe mount adapter (attached to unit), CA-AK1-AN cold shoe mount adapter |
| CA-XLR2d-AN | Mic holder (attached to unit, Battery holder, 3.5mm(1/8″) stereo mini cable, TASCAM ID registration guide, Quick Guide (including warranty), CA-AK1-AN cold shoe mount adapter(attached to unit) |
*1 0dBu=0.775Vrms
*2 0dBV=1Vrms
Audio performance
| Frequency response | |
| 20Hz to 20kHz | +0.5dB/-1.0dB( to digital input,Fs=48kHz) |
| 20Hz to 40kHz | +0.5dB/-1.0dB( to digital input,Fs=96kHz) |
| Mic amp EIN (equivalent input noise) | -120dBu or less(150Ω termination, GAIN maximun, A-Weight) |
| Dynamic range | 95dB or higher (22kHzLPF+A-Weight) |
Battery operation time (continuous operation)
Common settings : Input volume center, ATT setting “0dB”, LEVEL setting “MAN”, LIMITER setting “OFF”
Note: When using phantom power, the operation time might be reduceddepending on the mic being used.
Using alkaline batteries (EVOLTA)
| Use conditions | Operation time |
| Input through INPUT 1 jacks (Condenser mic) Phantom power used (2mA load) |
About 4 hours |
| Input through INPUT 1 jacks (Condenser mic) Phantom power used (5mA load) |
About 3 hours |
| Input through INPUT 1&2 jacks (Dynamic mics) Phantom power unused |
About 6.5 hours |
| Input through INPUT 1 jacks (TASCAM TM-200SG) Phantom power used |
About 4 hours |
Using Ni-MH battery (eneloop)
| Use conditions | Operation time |
| Input through INPUT 1 jacks (Condenser mic) Phantom power used (2mA load) |
About 5 hours |
| Input through INPUT 1 jacks (Condenser mic) Phantom power used (5mA load) |
About 4 hours |
| Input through INPUT 1&2 jacks (Dynamic mics) Phantom power unused |
About 7 hours |
| Input through INPUT 1 jacks (TASCAM TM-200SG) Phantom power used |
About 5 hours |
Using lithium-ion batteries (Energizer ULTIMATE LITHIUM)
| Use conditions | Operation time |
| Input through INPUT 1 jacks (Condenser mic) Phantom power used (2mA load) |
About 10 hours |
| Input through INPUT 1 jacks (Condenser mic) Phantom power used (5mA load) |
About 8 hours |
| Input through INPUT 1&2 jacks (Dynamic mics) Phantom power unused |
About 14.5 hours |
| Input through INPUT 1 jacks (TASCAM TM-200SG) Phantom power used |
About 10 hours |
| Specification |
|---|
| Choose | รับประกันศูนย์ 1 ปี For CA-XLR2d-C (Canon Kit ), รับประกันศูนย์ 1 ปี For CA-XLR2d-F (Fujifilm Kit ), รับประกันศูนย์ 1 ปี For CA-XLR2d-AN (Analog Interface Kit) |
|---|
Be the first to review “Tascam CA-XLR2d XLR Microphone Adapter For Mirrorless Cameras”
You must be logged in to post a review.
Related products
Recorder/Mixer - เครื่องบันทึกเสียง มิกเซอร์
29,900 ฿
Recorder/Mixer - เครื่องบันทึกเสียง มิกเซอร์
39,900 ฿
Video Capture-กล่องแปลงสัญญาณ
Elgato Wave XLR Microphone Interface & Digital Mixing Solution
6,890 ฿
Out of stock
Recorder/Mixer - เครื่องบันทึกเสียง มิกเซอร์
7,490 ฿
Recorder/Mixer - เครื่องบันทึกเสียง มิกเซอร์
21,500 ฿
Sale!
Recorder/Mixer - เครื่องบันทึกเสียง มิกเซอร์
Original price was: 19,600 ฿.15,680 ฿Current price is: 15,680 ฿.
Recorder/Mixer - เครื่องบันทึกเสียง มิกเซอร์
19,900 ฿
Recorder/Mixer - เครื่องบันทึกเสียง มิกเซอร์
4,950 ฿
Reviews
There are no reviews yet.